NANOTECHNOLOGY-BASED MATERIALS APPLIED IN CURTAIN WALL SYSTEM: A CASE STUDY FROM TURKEY
DOI:
https://doi.org/10.15320/ICONARP.2020.118Keywords:
Curtain wall system, glass curtain wall, aluminum curtain wall system, nano-products, nanotechnologyAbstract
Purpose
Application of nanotechnology in construction sector brings innovation to building materials like self-cleaning and antifog. These features make it possible to shorten the maintenance and repair periods of building materials, and thereby reduce maintenance costs. The development of environmentally friendly building materials become very important to reduce air pollution and adverse effects. The competitiveness of companies in the construction sector is based on technological developments. Now, it is possible to reduce costs and respond to various customer demands owing to new technologies. Nanotechnology affects many sectors as a technology that contributes significantly to the development of the properties of materials, and it has also found its place in the construction sector. The purpose of this study is to examine the use of nanomaterials used in the construction sector in the context of glass and curtain wall systems. Also, the aims of this paper are to reveal the advantages of nanomaterials by examining the differences between the traditional and the nanotechnology applications used in glass and curtain wall systems, to remark nanomaterial applications in construction sector, and finally to expand awareness in this regard.
Design/Methodology/Approach
This study consisted in reviewing existing nanomaterials in the curtain wall system applications through projects, and conducting a survey. A preliminary letter and a 14-question survey were prepared. This study covers aluminum composite and glass curtain wall suppliers which were contacted by email. Face to face interviews were made with those who could not be reached by e-mail. The survey that was formed by the authors was sent to 68 participants working in the aluminum composite and glass curtain wall companies operating in the construction sector.
Findings
The findings of the study show that there are a limited number of structures using nanomaterials in Turkey. While these materials are used in many different parts of the structures, the most preferred in the outer shell design of the buildings (curtain wall systems).The construction sector should be considered as one of the critical sectors where nanotechnology can be practiced.
Research Limitations/Implications
The paper contains the normal limitations associated with the survey method including potential non-response bias.
Practical Implications
Potential of nanotechnology applications is growing in the construction field. There are large numbers of nanotechnology applications in the sector. However, construction sector is a traditional and cost oriented industry, rather than a technology focused sector. High cost of nanotechnology-based materials is a major obstacle to applications of nanotechnology in the construction sector. Even though some steps have been taken in the field of nanotechnology, the sector should be supported with incentives by government and research institutions.
Social Implications
The construction sector is the largest sector that causes environmental problems through construction, operation and maintenance of buildings. Due to its potential contribution to sustainability, it makes nanotechnology one of the most promising technologies in the green building area. Nanotechnology has much to offer the construction industry as it moves towards a more sustainable future. The effects of nanotechnological materials on the environment and human health are not clearly defined yet. More studies needed about that.
Originality/Value
Performing such a study is considered to be crucial for construction sector of developed and developing countries, so that the construction sector also avails benefits from this revolutionary technology.
Metrics
References
Ali, A.A. (2020). Nanotechnology in civil engineering construction. International Journal of Structural and Civil Engineering Research 9(1),87-90.
Andersen, M.M. (2005). Embryonic innovation – path creation in nanotechnology. Paper for the DRUID Conference, June, Helsinore.
Andersen M.M. & Rasmussen B. (2006). Nanotechnology development – environmental opportunities and risks, Risø-R Report, Roskilde.
Bartos, P. J. M. (2009). Nanotechnology in construction: a roadmap for development. In Z. Bittnar, Bartos P. J. M., Nemecek J., Smilauer, V. and Zeman J. (eds.), Nanotechnology in construction: Proceedings of the NICOM3, 3rd International Symposium on Nanotechnology in Construction, Prague, 15–26.
Bozoğlu, J. ve Arditi, D. (2012). Yapılarda ve yapım yönetiminde yanoteknoloji uygulamaları. 2. Proje ve Yapım Yönetimi Kongresi, 13 – 16 Eylül, İzmir Yüksek Teknoloji Enstitüsü, Urla-İzmir
Candemir, B., Beyhan, B. & Karaata, S. (2012). İnşaat Sektöründe Sürdürülebilirlik: Yeşil Binalar ve Nanoteknoloji Stratejileri, Tüsiad Yayın No: TÜSİAD-T/2012-10/533
Daryoush B. & Darvish A. (2013). A case study and review of nanotechnology and nanomaterials in green architecture. Research Journal of Environmental and Earth Sciences, 5(2),78–84.
Da Silva, L.F.M. Öchsner, A. & Adams R.D. (eds.), (2011). Handbook of adhesion technology, Springer, Heidelberg.
Das, K. and Sen, S. & Biswas, P. (2020). A review paper – on the use of nanotechnology in construction industry. January Available at SSRN: https://ssrn.com/abstract=3526716 or http://dx doi.org/10.2139/ssrn.3526716
Dixon, W, (2010). The impacts of construction and the built environment. Briefing Notes, Willmott-Dixon Group.
Enshassi, A., Koshendoefer, B. & Rizg, E. (2014). An evaluation of environmental impacts of construction projects”, Revista Ingeniera de Construction, 29(3), 234-254
Firoozi A.A., Taha M.R., & Firoozi A.A. (2014). Nanotechnology in civil Engineering, Electron J Geotech Eng, 19:4673–4682.
Forbes, L. H. & Ahmed, S. M. (2011). Modern construction, lean project delivery and ıntegrated practices, Boca Raton, FL: CRC Press, Taylor and Francis.
Genç, O , Bozkurt, A , Coşkun, H., & Erdiş, E . (2016). Türkiye inşaat endüstrisindeki inovasyon düzeyinin inşaat mühendisliği penceresinden görünümü. Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , 30 (2) , 183-190.
Gür, M. (2010). Nanomimarlık bağlamında nanomalzemeler. Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Cilt 15, Sayı 2, 81-90.
Halicioglu, F. H. (2009). The potential benefits of nanotechnology for innovative solutions in the construction sector. Nanotechnology in Construction 3., Springer, Heidelberg, 209–214.
Hossain, K. & Rameeja, S. (2015). Importance of nanotechnology in civil engineering. EJSD, 4: 161–166.
Lazim, N. A., Asim, N., Rani M.A.A., Ahmadzadeh, A., Yarmo, M.A., & Radiman, S. (2008). Investigation of nanoscale tungsten (VI) oxide as a catalyst for the ozonolysis of oleic acid. European Journal of Scientific Research, 24 (4), 463-467.
Lee, J., Mahendra, S. & Alvarez, P.P.J. (2010). Nanomaterials in the construction industry: a review of their applications and environmental health and safety considerations. ACS NANO, 27;4(7):3580-90.
Mann S. (2006). Nanotechnology and construction, Nanoforum Report, 1–55.
Mitsubishi Chemical Euro Asia, (2018). Alpolic broşür, Mitsubishi Chemical Euro Asia. Türkiye
Niroumand, H., Zain, M. F. M., & Jamil, M. (2013). The role of nanotechnology in architecture and built environment. Procedia - Social and Behavioral Sciences, 89(0), 10-15.
Olafusi, O. S., Sadiku, E.R., Snyman, J. et al. (2019). Application of nanotechnology in concrete and supplementary cementitious materials: a review for sustainable construction. SN Appl. Sci. 1, 580. https://doi.org/10.1007/s42452-019-0600-7
Orhon, A. V. (2014). Sürdürülebilir çatı ve cephe sistemleri, 7. Ulusal Çatı & Cephe Sempozyumu, 3– 4 Nisan,Yıldız Teknik Üniversitesi, İstanbul
Özenbaş,M., (2006). Nanoyapılı malzemeler ve nanoteknoloji. Bilim ve Teknoloji Stratejileri Çalıştayı, 31 Mayıs-1 Haziran, 2.
Raj, B., Van de Voorde, M. & Mahajan, Y. (2017). Nanotechnology for Energy Sustainability (3 Volume Set), John Wiley & Sons, Hoboken, NJ.
Rao, N. V. Rajasekhar, M. Vijayalakshmi, K., & Vamshykrishna, M. (2015). The future of civil engineering with the influence and impact of nanotechnology on properties of materials. Procedia Materials Science, 10, 111-115.
Savić, J., Đurić-Mijović, D., & Bogdanović, V. (2013). Architectural glass: types, performance and legislation. Facta universitatis-series: Architecture and Civil Engineering, 11(1), 35-45.
Serpell, A., & Alvarez, R., (2014). A systematic approach for evaluating innovation management in construction companies. Procedia Engineering, 85: 464-472.
Sev, A & Ezel, M. (2014). Nanotechnology innovations for the sustainable buildings of the future. World Acad Sci Eng Technol Int J Civil Environ Struct Constr Architectural Eng, 8(8), 886-896.
Taniguchi N. (1974). On the basic concept of nanotechnology. Proceedings of the International Conference on Production Engineering, Tokyo, 18-23.
Teizer J., Venugopal M., Teizer W., & Felkl, J. (2012). Nanotechnology and its impact on construction: bridging the gap between researchers and industry professionals. J Constr Eng Manag, 138:595–604.
Tepe, A. (2007). Nanoteknolojide nano ölçekteki yapıların yerel olmayan elastisite çerçevesinde incelenmesi, İTÜ, Fen Bilimleri Enstitüsü
Tülübaş Gökuç, Y. & Turunç S. (2019). Use of nanotechnological building materials in the Turkish construction industry. J Sustain. Construct. Mater. Technol. 4(1),296–305.
Van Broekhuizen, F. & Van Broekhuizen, P. (2009). Nano-products in the European construction industry. European Federation of Building and Wood Workers and European Construction Industry Federation, 1-109.
Zhu, W., Bartos, P. J., & Porro, A. (2004). Application of nanotechnology in construction, Materials and Structures, 37(9), 649-658.
URL1:.https://www.nanowerk.com/nanotechnology/reports/reportpdf/report72.pdf (15.12.2018)
URL2:.http://www.anbonano.com.tr/camyuzeykoruma.html (12.01.2019)
URL3:.http://www.spannverbund.de/index.php/en/post-tower-bonn.html (17.12.2018)
URL4:.https://www.glassonweb.com/article/role-adaptive-facades
URL5:.https://www.commercialwindows.org/thermochromic.php (02.01.2019)
URL6:.https://www.architectmagazine.com/design/buildings/bertram-and-judith-kohl-building_o (26.01.2019)
URL7:.https://www.mimoa.eu/projects/Austria/Vienna/Monte%20Verde%20Tower (13.02.2019)
URL8:.https://biozet.com/2015/11/16/projeronesansbiz-kucukyali-ofis-park (17.12.2019)
URL9:.http://trends.archiexpo.com/arconic-architectural-products-merxheim-frankreic/project-67104-227013.html (23.01.2019)
URL10:.http://www.arkitera.com/proje/7282/expo-2016antalya-expo-kulesi2 (02.02.2019)
Downloads
Published
How to Cite
Issue
Section
License
COPYRIGHT POLICY
1. The International Journal of Architecture and Planning (ICONARP) open access articles are licensed under a Creative Commons Attribution-NonCommercial-NoDeriatives 4.0 International (CC BY-NC-ND 4.0). This license lets the author to share (copy and redistribute) his/her article in any medium or format.
2. ICONARP cannot revoke these freedoms as long as you follow the license terms. Under the following terms:
The author must give appropriate credit, provide a link to ICONARP, and indicate if changes were made on the article. The author may do so in any reasonable manner, but not in any way that suggests the ICONARP endorses the author or his/her use.
The author may not use the article for commercial purposes.
If the author remix, transform, or build upon the article, s/he may not distribute the modified material.
The author may share print or electronic copies of the Article with colleagues.
The author may use the Article within his/her employer’s institution or company for educational or research purposes, including use in course packs.
3. The author authorizes the International Journal of Architecture and Planning (ICONARP) to exclusively publish online his/her Article, and to post his/her biography at the end of the article, and to use the articles.
4. The author agrees to the International Journal of Architecture and Planning (ICONARP) using any images from the Article on the cover of the Journal, and in any marketing material.
5. As the author, copyright in the Article remains in his/her name.
6. All papers should be submitted electronically. All submitted manuscripts must be original work that is not under submission at another journal or under consideration for publication in another form, such as a monograph or chapter of a book. Authors of submitted papers are obligated not to submit their paper for publication elsewhere until an editorial decision is rendered on their submission. Further, authors of accepted papers are prohibited from publishing the results in other publications that appear before the paper is published in the Journal.
ICONARP International Journal of Architecture and Planning is an OAJ supported by 